Year: 2011

Mason Jar Soap Pump

Here’s a quick DIY project – upcycle old mason jars into fun funky bathroom or kitchen liquid soap dispensers.

Supplies Needed:

•Old mason jar with lid
•Drill
•Ruler
•Marker
•Soap dispenser pump
•Liquid soap
Step 1:
Measure and mark the center of the jar’s lid.

Step 2:
Drill a hole approximately half an inch wide, at the marked spot, and to fit the width of the pump.

Step 3:
Fill the jar with liquid soap, insert the pump (trim, if needed), and start washing.

via

Gold Painted Jeans

You’ll need doilies of different sizes and patterns, a paint sponge or paintbrush, Krylon Easy Tack Spray Adhesive, Lumiere Fabric Paint in Bright Gold, and a pair of jeans.

Lightly spray the doilies with the adhesive and press down firmly on the jeans. We overlapped the doilies and stopped at three but there really isn’t a right or wrong way to creating your own pattern. Gently dab paint into the negative spaces of the doily, making sure not to overload the paintbrush.

Apply at least another coat of paint, let dry and peel back the doilies to reveal the pattern.


via

Can Purse

Soda Can Purse

Supplies Needed:

  • Soda Cans
  • Stapler & Staples
  • Purse Template
  • Knife & Scissors
  • Ruler
  • Copier
  • Naugahyde or Similar Fabric
  • Glue
  • Wire
  • Nail or Hole Punch

Step 1 –
Trace out a purse shape (including the handles) onto paper, you just need the two large sides. Then, on the template draw squares & rectangles within the purse outline using your ruler.

Step 2 –
Next, number each square & rectangle shape and make a copy of the paper. Cut one of the drawings up, so now you have a bunch of numbered shapes. The other sheet will serve  as a master copy of how the shapes went together.

Step 3 –
Then, take a bunch of soda cans, clean them and cut the tops & bottoms out of them with a knife and then regular scissors. When complete you will end up with sheets of the aluminum can.

Step 4 –
Trace the cut out shapes onto the cans. Then cut out the shapes leaving about quarter on an inch (maybe 5-7 millimeters) edge. To make it easy, write the corresponding number on each piece. If you are using a variety of sodas, make sure to think about the color combination and layout when you are cutting out pieces. Then folded the edges under, to hide the sharp edge of the can. You can use a ruler to help you.

Step 5 –
Next, arrange the shapes back into the purse template and use a stapler with regular staples to join the can pieces. You want to make sure the stapler can reach each piece to connect it, so be sure to begin joining the cans together from the middle and work your way out. Remember, the can pieces are not overlapped but side by side.
soda can purse side view
Step 6 –
For the bottom and sides of the purse, created one long strip of soda can pieces.

Step 7 –
After you have all three pieces of your purse, trace out the purse shapes onto naugahyde, or some sort of vinyl or pleather would probably work fine, just as long as its durable. Then, glue the material onto the soda can purse shapes.
soda can purse close up
Step 8 –
Then take a small nail and punch holes at regular intervals around the edges of the purse forms. Then take wire and lace all three pieces together.

Now, you’re ready for a night out on the town!

via