Oohh very professional finish – makes a handsome gift!
- Exterior: a sheet of leather 31cm x 16cm (12in x 6.3in) and 1.5mm (4oz) thick (roughly)
- Lining: a sheet of leather 31cm x 16cm (12in x 6.3in) and 1.0mm (2oz) thick (roughly)
- Mold: Split leather 15cm x 18cm (5.9in x 7in) 2mm (3oz) thick (roughly) X 4 set
- Utility knife /Mallet /Ruller/ Awl/ Tong/ Small clamps
- Pricking iron (5mm spacing/ slanted)
- Hole punch : 5mm / 3mm diameter (for 13mm eyelet snap button)
- Edge beveler size #1
- Needle (John James #4)
- Thread Vinymo #5 (6mm thick)
- PVC Punching board 15cmX20cm (roughly)
- Eyelet snap button/ Setter
- Edge beveler (size #1)/ Sandpaper (400 grit)
- Leather dye/ Piece of sponge
- Wood slicker/ Tokonole (Burnishing Gum)
- Water/ Tray (for soaking leather)
Do It And How 